PET bottle washing line cleaning process is divided into three stages

PET washing process requirements, The PET bottle washing line cleaning process is divided into three stages: pre-wash, the master wash and rinse. PET washing line theory by cleaning requirements, many wash cleaning experience in plant material, configuration PET cleaning equipment combination.
Process is as follows:
→ rinse spiral elevator → spray wash the feeder → cyclone dehydrator → screw feeder with wash the feeder → whirlwind dehydration machine → spray wash machine → rinse → rinsing machine → whirlwind dehydration machine
PET washing equipment PET cleaning equipment: conveyor belt (or spiral feeder), Crusher, spiral elevator, parallel washing machine (friction wash feeder), screw with the main wash machine, washing machine, bottle flakes dewatering machine, silos.
PET bottle washing line use precautions:
Broken: choose the right crusher (force feed mill), adjust the distance of a good knife and sieve bottom, to prevent too much debris.
Main wash: equipment selection with scrub and heating functions (snails with the main washing machine), and to ensure that the washing time; appropriate choice of cleaning agent to ensure to wash off all the stubborn stains.
3. Rinsing: the best equipment with scrub rinse (ribbon rinsing machine), to further remove residual stains and cleaning agents;
Dehydration: best cyclone dehydration machine, energy-saving, high dewatering rate.
pet cleaning device characteristics: a high degree of automation, from crushing, conveying, washing, rinsing, dehydration integration, good quality and high yield.
PET bottle washing line safety precautions:
A machine do not remember when unplug the power.
Second, do not use the machine when you rewind the reel of tape storage cassette holder, to avoid the next time you use deformation.
Do not directly touch heating film.
Fourth, not washed with water machine, wet workplace operator Do barefoot.
V. operation, do not head hand through the strap runway.
The capstan roller surface Do not viscous oil.
Please confirm the power used by the machine, do not plug the wrong power This machine adopts three-phase four-wire system. Spend wire is the ground zero line for leakage protection.
8, do not arbitrarily replace machine parts.
Nine main parts often lubricated with oil.